Harrier Filters Ltd Leaders In Hydraulic Replacement Filters


The oil transfer system unit is designed for transferring of oils where you are located with out the need for mains power or compressed air. This is achieved through the built-in battery and charger. The battery must be recharged after transferring approx 2-3 drums of oil.


Flow rate 6 L/min

Noise levels less than 65 DB

Motor supply 12vdc

Oil viscosity from 10 to 2000 cSt

On demand dispensing with pressure switch

Flow meter (Item 2 only) with precision of +/- 0.5%


Tubular structure trailer mounted support for moving drums,

Complete with nozzle support, pipe support and drip collector.

Self priming pump with DC motor, 12vdc

Protection Rating IP55

3/4” gas suction pipe with filter.

3 Metre long 5/8” gas delivery pipe.

Delivery nozzle with flexible end and non-drip valve.

Item 2 comes with meter.

Pressure switch with incorporated safety valve.

Battery with battery charger.


Flow meters with oval gears

Click here to download a pdf of the Fluid Transfer section of our catalogue

Showing results 1 to 2 of 2
VISC120/1 DCpst
VISCOTROLL 120/1 DC pst 6 L/Min 12 DC




VISC120/1 DCpstK400
VISCOTROLL 120/1 DC pst K400 6 L/Min 12 DC




Showing results 1 to 2 of 2

In the Filtration Part Number Search field above enter the part number and click "GO". This is usually found on the bottom "lid" or end cap of the filter. If you have a full assembly - housing plus filter inside - you will need to remove the filter from the housing to obtain an accurate part number. The majority of all Original Equipment Manufacturers filters can also be crossed to a direct replacement for your convenience. (See our Hydraulic Cross Reference Section) This offers you the best lead time, pricing and gives the customer a choice in their filtration needs. We have one of the largest cross reference data bases in the world. Don’t hesitate to contact us for your exact cross if you cannot find it here.