Harrier Filters Ltd Leaders In Hydraulic Replacement Filters
Filler breather for tank top installation with breather and strainer and complete with safety chains.Just drill a hole and push in.
NOW NO NEED TO DRILL FIXING HOLES, JUST CUT A HOLE IN THE TOP OF THE RESERVOIR WITH A DIAMETER OF 55MM MIN AND 55.3MM MAX. WALL THICKNESS MUST NOT EXCEED 8MM AND NOT LESS THAN 2MM.
ASSEMBLY CONTAINS 3 PARTS. TO INSTALL THE INSIDE LOCKING RING HAS TO BE REMOVED TO INSERT THE MAIN BODY INTO A PRE-DRILLED HOLE. ONCE INSERTED THE INSIDE LOCKING RING HAS TO BE INSTALLED AND THEN THE EXTERNAL LOCKING RING HAS TO BE TIGHTENED
MAX OPERATING TEMPERATURE 70-80°C
|CTR/C|| Push-In Filler Breather
FREE UK DELIVERY
In the Filtration Part Number Search field above enter the part number and click "GO". This is usually found on the bottom "lid" or end cap of the filter. If you have a full assembly - housing plus filter inside - you will need to remove the filter from the housing to obtain an accurate part number. The majority of all Original Equipment Manufacturers filters can also be crossed to a direct replacement for your convenience. (See our Hydraulic Cross Reference Section) This offers you the best lead time, pricing and gives the customer a choice in their filtration needs. We have one of the largest cross reference data bases in the world. Don’t hesitate to contact us for your exact cross if you cannot find it here.